Pigtail SC/UPC 06 colors OM3 0.9mm OFNR 3M, tight buffer

$23.10

6-color SC/UPC OM3 multimode pigtail set — 50 µm laser-optimized fiber, 0.9 mm OFNR, 3 m, tight buffer; 10 GbE to 300 m, 40/100 GbE to 100 m.

- +
SKU: RCT-FPT-032 Category: Tags: , , ,

Pigtail SC/UPC 06 Colors OM3 0.9 mm OFNR 3M, Tight Buffer from Red Cable Technology (RCT) is a 6-color pigtail set on laser-optimized OM3 50/125 µm multi-mode fiber, made for terminating fiber optic cables through fusion or mechanical splicing. Each leg runs 3 meters of 0.9 mm OFNR-jacketed fiber into an SC/UPC connector — a quality pigtail plus correct fusion splicing delivers the best termination performance possible. They land exactly where you’d expect: ODFs, fiber terminal boxes, and distribution boxes.

Features & Specs:

  • 6 color-coded pigtails with SC/UPC connectors; OM3 suggested jacket color is aqua
  • OM3: 50 µm core like OM2, but optimized for laser-based equipment using fewer modes of light — that optimization gives you 10 Gigabit Ethernet up to 300 meters; improved production techniques have extended its capability to 40 Gigabit and 100 Gigabit Ethernet up to 100 meters; 10 Gigabit Ethernet is its most common use
  • Newer deployments favor laser-optimized 50/125 µm multi-mode fiber (OM3), which provides enough bandwidth to support 10 Gigabit Ethernet up to 300 meters; manufacturers have refined the process enough that cables supporting 10 GbE up to 400 meters can be made
  • Laser-optimized multi-mode fiber (LOMMF) is designed for use with 850 nm VCSELs
  • UPC connectors are polished with no angle — not exactly flat, with a slight curvature for better core alignment; for identification, UPC connectors are blue while APC connectors are green
  • 0.9 mm buffered fiber, OFNR-rated jacket, 3 m length, tight-buffer construction
  • Tight-buffered construction uses 900 µm buffered fibers; the core is guarded by a two-layer coating — the first plastic, the second waterproof acrylate — so the core is never at risk of exposure the way it can be in loose-buffered cable
  • Fibers sit inside dielectric strength members (FRP) and a rugged polyurethane outer jacket, giving superior environmental and mechanical protection
  • Fiber count for tight-buffered cable ranges from 1 to 144 fibers; 2, 6, 12, and 24 are most common, with 48, 96, and 144 available for specific applications

## Where OM3 shines

OM3 is the workhorse for short-reach laser links — 10 GbE to 300 meters (or 40/100 GbE inside 100 meters) over cost-effective multi-mode in data center and campus runs.

Reviews

There are no reviews yet.

Be the first to review “Pigtail SC/UPC 06 colors OM3 0.9mm OFNR 3M, tight buffer”

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top